Needle Valves
A needle valve is used to isolate an instrument and/or control the flow and/or to prevent the instrument caused by sudden pressure surges. Typically, they are used with media that are less viscous and where flow rates are low.
Various configurations are possible, female * female, female * male, male * female, same size connection and different size connections.
Industries: Oil & Gas (upstream, midstream, downstream), Petrochem, Chemical, Food, Pharma, Pulp & Paper, etc.
Applications:
- Isolation (throttling & on-off)
Specifications:
- Rating 6.000 psi
- Pressure 413 bar @ 38C / 6.000 psi @ 100F
- Size ¼” – 1”
- Vent/Test ¼”
- Body style Straight
- Material 316
- Stem 1 piece, anti blow out
- Tip Non-rotating, self centering
- Packing PTFE (standard), -73°C to 210°C (-99°F to 410°F)
- Connection Threaded
- Threads NPT
- Operator T bar
- Packing External adjustable
- Orifice 4 mm
- Standards MSS SP-99, ANSI/ASME B1.20.1, ASME B16.34
Options:
- Rating 10.000 psi (higher on request)
- Pressure 690 bar @ 38C (10.000 psi @100F)
- Packing Graphite, -54°C to 510°C (-65°F to 950°F)
- Material Virtually all types
- Certification NACE
- Operator Anti tamper operator, Lockable operator
- Connection SW, BW, compression fitting
- Threads BSPP, BSPT, Metric
- Cleaning Oxygen
- Mounting Panel
- Body style Angle
Needle Valve Female x Female
- S6NF44S 6,000 PSI / S10NF44S 10,000 PSI
- Inlet ¼” – Outlet ¼”
- S6NF66S 6,000 PSI / S10NF66S 10,000 PSI
- Inlet ⅜” – Outlet ⅜”
- S6NF88S 6,000 PSI / S10NF88S 10,000 PSI
- Inlet ½” – Outlet ½”
- S6NF1212S 6,000 PSI / S10NF1212S 10,000 PSI
- Inlet ¾” – Outlet ¾”
- S6NF1616S 6,000 PSI
- Inlet 1″ – Outlet 1″
Downloads
Drawings:
needle-valve-s10nf44s-drawing
needle-valve-s6nf88s-drawing
needle-valve-s10nf88ss-drawing
Needle Valve Male x Female
- S6NM44S 6,000 PSI / S10NM44S 10,000 PSI
- Inlet ¼” – Outlet ¼”
- S6NM66S 6,000 PSI / S10NM66S 10,000 PSI
- Inlet ⅜” – Outlet ⅜”
- S6NM88S 6,000 PSI / S10NM88S 10,000 PSI
- Inlet ½” – Outlet ½”
- S6NM1212S 6,000 PSI / S10NM1212S 10,000 PSI
- Inlet ¾” – Outlet ¾”
- S6NM1616S 6,000 PSI
- Inlet 1″ – Outlet 1″
Downloads
Drawing:
needle-valve-s6nm88s-drawing
Gauge valves
Designed for safe installation of pressure gauges & transmitters. These valves will allow for isolation, calibration and draining.
Specifications:
- Rating 6.000 psi
- Pressure 413 bar @ 38C / 6.000 psi @ 100F
- Size ¼” – 1”
- Vent/Test ¼”
- Body style Straight
- Material 316
- Stem 1 piece, anti blow out
- Tip Non-rotating, self centering
- Packing PTFE (standard), -73°C to 210°C (-99°F to 410°F)
- Connection Threaded
- Threads NPT
- Operator T bar
- Packing External adjustable
- Orifice 4 mm
- Standards MSS – SP99, ANSI/ASME B1.20.1, ASME B16.34
Options:
- Rating 10.000 psi (higher on request)
- Pressure 690 bar @ 38C (10.000 psi @100F)
- Packing Graphite, -54°C to 510°C (-65°F to 950°F)
- Material Virtually all grades
- Certification NACE
- Operator Anti tamper operator, Lockable operator
- Connection SW, BW, compression fitting
- Threads BSPP, BSPT, Metric
- Cleaning Oxygen
- Test conn. Flange (DIN only), M20*1.5
Gauge Bleed Male x Female
- S61NBM88S 6,000 PSI
- Inlet ½” – Outlet ½”
Downloads
Drawing:
needle-valve-s61nbm88s-drawing
Multi port gauge valve or root valve
This valve lets the user position the gauge or switch in any of the 3 directions the ports are oriented.
They also provide the option of installing 2 instruments on 1 valve.
Gauge Multiport Female x Female
- S61NTF88S 6,000 PSI
- Inlet ½” – Outlet ½”
Downloads
Drawing:
gauge-multiport-female-female-drawing
Gauge Multiport Male x Female
- S61NTM88S 6,000 PSI
- Inlet ½” – Outlet ½”
Downloads
Drawing:
gauge-multiport-male-female-drawing
